Shingle Weight Calculator

Planning a roof tear-off? Enter each roof section and the number of layers, and this shingle weight calculator estimates how many roofing squares you are removing and what the old shingles weigh.

Measure in feet or metres. If you can only measure from the ground, the calculator can allow for the roof pitch.

Enter each roof section as length along the eave by width from eave to ridge, measured on the roof.

Item 1: Roof shingles (roof section)

Same size items? Enter how many.

Know your company's weight limit?

Only if a company has told you. Leave blank if you do not know; we never guess a limit.

Estimate first, then save the recommended size.

How to use this calculator

  1. Enter one roof section: length along the eave and width from eave to ridge, measured on the roof surface.
  2. Choose the number of layers you are removing.
  3. If several roof sections are the same size, enter how many in Quantity. Use + Add another item for other sections.
  4. Open More options to pick 3-tab or architectural shingles, a wet tear-off, or measurements taken from the ground with a roof pitch.
  5. Select Estimate size to see roofing squares, weight and the suggested bin size.

How we estimate

  • One roofing square is 100 ft² (9.29 m²) of roof. We multiply by the number of layers.
  • Old asphalt shingles weigh about 200 to 250 lb per square per layer for 3-tab, and 250 to 430 lb for architectural. We add 5 to 15% for underlayment, nails and scraps.
  • Torn-off shingles take about 1/3 to 1/2 yd³ of bin space per square per layer.
  • Shingles are weight-limited, so we never suggest a bin above the Medium category (12 to 16 yd). Bigger jobs need a swap or a second bin.

Results are estimates, not quotes or safe-load ratings. Always confirm the weight limit, accepted materials and bin sizes with the bin rental company.

Tips before you book

  • Tell the company how many squares and layers you are removing. They will confirm the bin size and weight allowance.
  • Ask whether they have a roofing rate or a separate shingle recycling option.
  • Keep shingles separate from wood, metal and household garbage unless the company allows mixing.
  • Plan the tear-off for dry weather if you can: wet shingles weigh more.

Frequently asked questions

What is a roofing square?

A roofing square is 100 square feet (about 9.29 m²) of roof surface. A 2,000 ft² roof is about 20 squares per layer.

How much do 3-tab and architectural shingles weigh?

Old 3-tab shingles weigh about 200 to 250 lb per square per layer. Architectural shingles are heavier, about 250 to 430 lb per square per layer. Underlayment and nails add a little more.

How much does a 2-layer roof tear-off weigh?

Two layers roughly double the weight. A 20-square roof with two layers of unknown shingles works out to about 3.8 to 9.0 tonnes (8,400 to 19,800 lb), so it usually needs more than one bin load.

What size bin do I need for a roof?

Most companies use 10 to 14 yd roofing bins because shingles are heavy for their size. A 20-square single-layer roof usually fits the Small category (7 to 11 yd) by volume, but it can weigh about 2 to 4.5 tonnes, which is often more than a Small bin includes. Expect a swap or a heavier-rated bin, and confirm the weight allowance with the company. Larger or multi-layer roofs usually take several loads.

Do wet shingles weigh more?

Yes. Rain-soaked shingles can weigh 15 to 20% more, which can push you over the included weight. Tick wet tear-off under More options to see the higher range.

More calculators and guides

Scroll to Top