Breaking out a patio, slab, driveway or wall? This concrete weight calculator turns your measurements into an estimated weight in tonnes and pounds, plus a sensible bin size for the job.
It works in feet and inches or metres and centimetres, and it handles asphalt, interlock pavers, stone, hollow block and brick too.
Pick a patio, slab, driveway or wall, enter its size, then how many.
Same size items? Enter how many.
Know your company's weight limit?
Only if a company has told you. Leave blank if you do not know; we never guess a limit.
Estimate first, then save the recommended size.
Tick at least one material in a room, or add some furniture, to get an estimate.
You changed your inputs. Select Estimate size again to update this result.
You entered
Weights are estimates. Confirm the weight allowance and overage rates with the bin rental company.
Assumes about 2.5 yd³ per full-size pickup with an 8 ft bed (loose debris). Actual trucks vary.
We estimate on the high side on purpose: conservative tear-out volumes, plus a 30% safety margin, and we size up whenever a bin would be more than about 78% full. The result is one of the six size categories. Companies set their own included weight.
How to use this calculator
- Pick the item: a patio, slab or driveway, or a wall.
- Choose the material, then enter the length, width and thickness (for a wall: width along the wall, height and thickness).
- If you have several pieces the same size, enter how many in Quantity. Use + Add another item for different sizes.
- Open More options for rebar, tile on top, bedding sand or a gravel base.
- Select Estimate size to see the weight, the suggested size category and a short breakdown.
How we estimate
- Solid concrete weighs about 2,240 to 2,400 kg per m³ (roughly 140 to 150 lb per ft³). With rebar or mesh we use 2,350 to 2,500 kg per m³.
- Broken concrete takes up about 1.6 to 1.8 times the space it did as a slab. The weight does not change when it breaks, only the space it takes.
- Hollow concrete block counts only the solid part of each block, about half the wall outline, unless you tell us the cores are filled.
- Heavy loads are never suggested above the Medium category (12 to 16 yd). For concrete the most common bins are 4 to 8 yd heavy bins, or 10 to 12 yd from companies with larger trucks.
Results are estimates, not quotes or safe-load ratings. Always confirm the weight limit, accepted materials and bin sizes with the bin rental company.
Tips before you book
- Ask the company for its weight limit in tonnes and where the fill line is for concrete.
- Keep concrete clean: no soil, wood or garbage mixed in, unless the company says that is fine.
- Ask whether rebar or mesh is accepted, or needs to be cut back first.
- Protect your driveway with boards under the bin if the company recommends it.
Frequently asked questions
How much does a 4 inch concrete slab weigh per square foot?
A 4 inch (10 cm) slab weighs about 47 to 50 lb per square foot, or about 224 to 240 kg per square metre. Rebar adds a little more.
How many tonnes is a 10 x 12 ft concrete patio?
A 10 x 12 ft patio that is 4 inches thick is about 40 ft³ (1.13 m³) of concrete, which weighs about 2.5 to 2.8 tonnes (5,500 to 6,000 lb). Broken up, it takes about 2.3 to 2.7 yd³ of bin space.
Why is a bigger bin not better for concrete?
Concrete reaches a bin’s weight limit long before the bin looks full. A larger bin does not carry more weight safely, so companies often supply a 4 to 8 yd heavy bin, or a 10 to 12 yd bin if they have larger trucks, and ask you to load only to a fill line.
Can I put concrete with rebar in a dumpster?
Many companies accept concrete with rebar or wire mesh, but some charge more or ask you to cut the steel back. Ask before you book.
Can I mix concrete with other debris?
Usually not. Clean concrete is often recycled, so mixing it with soil, wood or garbage can mean a refused load or extra charges. Keep it separate unless the company says otherwise.